1. After loading MSM build, load device QCN, place in airplane mode before measurements.
2. Insert SD card in the device
3. Push required files to the SD card (Make sure SD card is formatted if using for the first time)
4. Make sure the device is ON, and USB is connected when executing the steps given below
a. Make sure that SD card read-only lock is not on
b. adb push FILE_PATH /sdcard/ (for example: adb push C:\AU4.mp3 /sdcard/)
c. If it is not able to write, change permissions as "chmod 777 /sdcard/"
5. Insert headset
6. Reboot the device
7. Connect USB to the device
8. Set Class D using batch file(classd.bat) - This step is only for 8660 Spartanized FFA
9. Disconnect USB
10. Play the audio file under e.g. Main menu > Music > Songs tab > select AU4.mp3
11. Set volume to 9/15
12. Turn off the display using the power key
13. Start power measurement
Note: SD card contribution should be subtracted for power measurement
No comments:
Post a Comment