1. After loading the build, load the QCN for the phone and make sure phone is camped on the network (WCDMA usually used internally). Load the MP3 file, plug in headset and reset the phone.
2. Set the screen timeout to "15 seconds"
3. Skip this step if the regular FFA is used for measuring
- Make sure Class D configuration is enabled if Spartanized FFA is being used for measurements
a. Connect the USB
b. Run HeadsetConfig_7x30_DLegacy.bat script to configure Class D, make sure no error mssage
c. Playback MP3 file
d. Unplug USB
4. Headset Calibration @ .1mW(for both Spartanized and non-Spartanized FFAs)
- When the file starts playing, adjust the volume button on the left side of the FFA to mute and then increase volume 4 times from mute.
- Customer need to ensure headset output .1mW on their device.
5. For MP3, wait for LCD/BL off, then start power measurement
No comments:
Post a Comment